Overview

If you have an AI-Fi light with either a solid white or flashing red LED indicator, please follow the steps below. 

Steps: 

1. Unplug the AI-Fi light(s) from power
2. Press and hold the reset button while the light is still disconnected from power
3. Connect the AI-Fi light to power then release the reset button after waiting 3 seconds
4. Allow up to 2 minutes for the light boot up (flashing teal indicates the light is in boot up mode)
5. Flashing Blue/Green LED indicator implies the AI-Fi light has been reset successfully 

Should you continue to encounter an issue, please email service@aquaillumination.com  Be sure to include your light's serial number and attach a copy of your receipt.