Button Controls on Axis

Feed Mode:
The Axis™ will spin very slowly for 10 minutes (default setting) and then
resume its set mode.

To Enter Feed Mode:
1. Hold the button on the Integrated Controller for 2-5 seconds until the
LED blinks white. The button LED will continue to blink white while in
Feed Mode.

All Off:
All connected Axis® pumps will stop.

To Power Off:
1. Hold the button on the Integrated Controller for 6+ seconds until the
LED fades out. The button LED will pulse white while pumps are off.

To Resume:
1. Press the button once.

Soft Reset:

A Soft Reset restarts the device but retains the schedule and settings.

To Perform a Soft Reset:
1. Unplug from power.
2. Reapply power.

Connected Reset:
A Connected Reset restarts the device and
removes your schedule and settings but keeps the
connection settings.

To perform a Connected Reset:
1. Unplug from power.
2. Press and hold button.
3. Reapply power and wait for the LED to blink
green.
4. Release button.

Factory Reset:
A Factory Reset restarts the device and removes
your settings and schedule data, returning it to
factory defaults

To perform a factory reset:
1. Unplug from power.
2. Press and hold button.
3. Reapply power and wait for the LED to blink red.
4. Release button.